Tag Archives: pto gearbox

China Professional Farm Agricultural Gearbox Pto Right Angle Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger for Micro Tiller 90 Degree Reducer agricultural gearbox generator

Product Description

Agricultural Gearbox For Micro Tiller 90 degree farm pto right angle tractor slasher rotary tiller pga feeder mixer earth auger reducer

Agricultural Gearbox For Service applications
Power transmission systems designed to the requirements of the building industry and the services for the community: from cement mixers to hydraulic pumps and to generator sets.
Agricultural Gearbox For Micro Tiller
Micro Tiller Gearbox

 

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request

Related Products

 



 

 

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape:
Step:
Samples:
US$ 999/Piece
1 Piece(Min.Order)

|
Request Sample

agriculturalparts

Agricultural Gearboxes

There are several types of agricultural gearboxes, and they are used in various applications. Among them are Bevel gearboxes, CZPT speed gearboxes, and Worm gear speed reducers. If you’re looking for a reliable, high-performing agricultural gearbox, you’ve come to the right place. Read on to learn more about these gearboxes. Also, check out our guide to bevel gearboxes.

Bevel gearboxes

The fatigue life of bevel gearboxes in agricultural equipment is determined by the cumulative damage sums for different operations. A simulation model was used to assess the fatigue life of a spiral bevel gear. The accumulated damage sums for each operation were shown in figure 9a. The subsoiler tillage operation exceeded the damage sum of one. This criterion indicates that the fatigue life of a gearbox is shorter than its service life.
In bevel gearboxes, the second shaft has two shafts that are connected to each other. One shaft is mounted to the outer surface of the housing 3 through bearings, while the other shaft has a flange that protrudes into the gear housing. The second shaft is attached via bearings on the gear housing and flange. It is mounted in this way to allow the bevel gear to rotate smoothly.
agriculturalparts

CZPT speed gearboxes

If you are an agricultural machine owner, you know that the right speed agricultural gearboxes can make the difference between a profitable crop harvest or a disaster. Today’s agricultural machinery can be found in a variety of applications, including for crop and animal production. Many of these applications require heavy-duty gearboxes with large capacity. The quality of these agricultural gearboxes depends on the quality of their bearings, which are important to the longevity of your equipment.
Industrial CZPT gearboxes can be repaired and overhauled by qualified and experienced technicians at CZPT Products. CZPT gearboxes can be repaired or rebuilt at significant savings. For industrial uses, the RAR model is perfect for applications where space is a consideration. Industrial CZPT gearboxes are available in multiple sizes and types, and they can be customized to meet your unique needs. For the best price and service, contact CZPT Products today!
agriculturalparts

CZPT speed bevel gearboxes

The demand for food has skyrocketed since the 2010 global financial crisis, and while the world’s population is still rising, at a slower rate, land is not. This is forcing agricultural machinery manufacturers to come up with innovative solutions to maximize the use of available land. The need for agricultural machinery is also growing due to shorter cropping cycles and wear and tear on equipment. CZPT gearbox manufacturers are meeting this demand with high-quality products.
A number of benefits make CZPT speed bevel gearboxes the preferred choice for agricultural applications. In addition to its renowned performance, the product’s design has been adapted for use in agricultural and glass machinery. The result is a unit with low backlash and high transmission. Moreover, the CZPT model is the best all-rounder among servo right-angle gearboxes.
China Professional Farm Agricultural Gearbox Pto Right Angle Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger for Micro Tiller 90 Degree Reducer   agricultural gearbox generatorChina Professional Farm Agricultural Gearbox Pto Right Angle Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger for Micro Tiller 90 Degree Reducer   agricultural gearbox generator
editor by CX 2023-11-13

China Good quality CZPT Low Backlash Square Flange Helical Speed Reducer Precision Planetary Gearbox for Servo Motor agricultural pto gearbox suppliers

Product Description

TaiBang Motor Industry Group Co., Ltd.

The main products is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV big gear motors, Planetary gear motor ,Worm gear motor etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine. 

Model Instruction

GB090-10-P2

GB 090 571 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
571 means 1:10 P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

Main Technical Performance
 

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

 

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000

 Noise test standard:Distance 1m,no load.Measured with an input speed 3000rpm 

 

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agriculturalparts

Choosing an Agricultural Gearbox

When it comes to choosing an agricultural gearbox, you may be wondering which one is right for you. The right gearbox for your tractor is important for several reasons. Here are some factors to consider. This article will provide an overview of these components. These parts include the Bevel gearbox, the Surface finish, Ellipticity, Bearings, and more. CZPT P/L offers a range of gearboxes for many different agricultural applications. The company’s PTO Speed Reducer/Increaser is specially designed to maintain the original rotation of PTO output.

Bevel gearboxes

Agricultural bevel gearboxes have high load capacity, making them an excellent choice for heavy-duty machines. Bevel gearing is also popular in mechanical transmission systems, such as those found on tractor transmission systems. Modern harvesters and other agricultural equipment require high-performance gearboxes to maintain efficient performance. To meet these requirements, agricultural equipment OEMs trust the Bevel gearboxes manufactured by CZPT Gearbox Company.
Unlike conventional worm gears, bevel gears use multiple shafts to transmit power. The bevel gears have three types of shafts, namely, hollow, projecting, and double-extended. In addition to being hollow, bevel gears can have additional shafts installed opposite the input shaft. They are available in a standard mount, aluminum housing, and three shaft types: double-extended, hollow, and projecting.
Agricultural bevel gearboxes are typically made from closed-grain cast-iron, although higher-sized models are made from SG 500/7 material. The screw is made from Cr-Mo medium carbon steel, which is hardened and tempered to maintain high core strength. A tapered roller bearing is mounted in the housing and is designed to carry heavy axial and radial loads. These gearboxes are also widely used in mixing, distribution, and cleaning machinery.
Bevel gearboxes for agricultural equipment are primarily used in agricultural machinery applications. Agricultural machinery often uses a PTO to transmit torque, but can only provide it at low speeds. Because of this, gearboxes are used for low-speed, massive-torque applications. Soil preparation and crop treatment are two common uses for these gearboxes. They are also useful in cement mixers.

Surface finish

In engineered gearboxes, the surface finish of the gear tooth surfaces is critical for smooth operation. Microscopic examination of gear tooth surfaces reveals a fine, unidirectional pattern. Traditionally used finishing methods include hob shaving, gear grinding, and honing. These techniques can improve the overall finish, but they also have their drawbacks. To overcome these problems, manufacturers use modern machine tooling techniques.
Agricultural gearboxes must be free from casting defects and mechanical damage. The processing surface must be flawless, with the ellipticity of the shaft hole no greater than 0.02 mm, and the centerline unevenness of the shaft holes is less than 0.015 mm. The relationship between shafts and bearing housing must be within 0.6 mm. These standards are crucial for the operation of agricultural machinery gearboxes.
Earlier, the gears were made of H11 and H13 tool steel, which progressively weakened after 20 gears. The tempering temperature is five to seven degrees Celsius or ten degrees Fahrenheit, depending on the steel used. To address this problem, Alloy 718 was developed. The alloy improved the life of die inserts, which reduced the overall cost. Further, the improved surface finish of agricultural gearboxes helped the customers reduce operating costs.
agriculturalparts

Ellipticity

A number of tasks require the use of an agricultural gearbox. These tasks can range from gardening to maintaining green spaces. These gearboxes transmit power from the input shaft to the output shaft, facilitating the change in direction, speed, or rotation. A quality gearbox is vital for the performance of agricultural machinery. Consider the type of operation you will be performing before buying one. You will also need to decide whether you will lubricate it.
An CZPT P/L Gearbox is one of their products. The company offers a full line of agricultural gearboxes at competitive prices. These gearboxes are designed to reduce input shaft speed and increase the PTO speed. The PTO Speed Reducer/Increaser is specially designed for this application. It helps maintain the original rotation of the PTO output shaft. It is suitable for various agricultural applications, including harvesters, balers, and cultivators.
An agricultural gearbox has an elliptic nature. It rotates around an axle core 90 degrees to create a bias state. The axle core of an agricultural gearbox rotates at a 90-degree angle to keep the shaft of the farming arbor in a neutral state. The bias state reduces the rotary driving force and reduces the amount of energy used in the operation. If a gearbox is designed correctly, it will keep a desired rotation torque.

Bearings

Agricultural gearboxes require high-quality bearings, and the global market is undergoing a transformation as more agricultural equipment becomes mechanized. The demand for bearings in agricultural equipment is expected to increase in the future, as cropping cycles will become shorter, and machinery will be used more intensively. Consequently, the wear on agricultural gear teeth and bearings will increase. This will result in a higher replacement rate for these parts.
Agricultural gearboxes must be able to withstand the high demands placed on them by the mounted farming implements. Harrows are a common example, and their disc-shaped attachments work to mix the top layer of soil. Because of their high demands, they must rotate continuously, and no matter what the terrain, they must be easy to run. Moreover, customised bearings will provide better seals.
In a study of 53 different agricultural gearboxes conducted by CZPT UK, they simulated 73 gear selections to find the right type of bearing. The simulation model took four weeks to set up and seven hours to run. As a result, CZPT always selects the “best bearing for the job” – a fitting solution. As such, CZPT understands the end user’s needs.
agriculturalparts

Quality of materials

Agricultural gearboxes play a vital role in the production of food. With the world’s population increasing, the need for food will also increase, and that means a greater need for efficient gearboxes. To make this happen, gearboxes must be able to withstand a variety of environmental conditions, including high and low temperatures, operation in arid and moist environments, and safety regulations.
A bevel gearbox has spiral bevel pinions that transmit rotational power to the axle. It is used in a variety of agricultural applications and is available in a range of ratios, horsepower, and configurations. This right-angle gear drive is widely used in portable grain elevators and grain carts. It has a 15-mm shaft diameter and is compatible with offset rotary fillers and hollow output shafts.
The gear box of a tractor is usually made of grey cast iron. Grey cast iron is a great choice for this component because it provides good wear resistance and vibration dampening. Belt pulleys are also made from grey cast iron. Large belt pulleys are made by casting processes. Similarly, the brake drum material needs to be high-quality to be effective. It is generally made of grey iron ASTM A48 Class 35.
China Good quality CZPT Low Backlash Square Flange Helical Speed Reducer Precision Planetary Gearbox for Servo Motor   agricultural pto gearbox suppliers	China Good quality CZPT Low Backlash Square Flange Helical Speed Reducer Precision Planetary Gearbox for Servo Motor   agricultural pto gearbox suppliers
editor by CX 2023-11-13

China Professional Farm Equipment Gear Box Rotary Cultivator Agricultural Machinery Tractor Pto Gearbox agricultural pto gearbox

Product Description

Product Description

 

Here is our advantages when compare to similar products from China:

 

1. Large output torque
2. Safe, reliable, economical, and durable
3. Stable transmission, quiet operation
4. High modularization design, may equip with various outer power inputs conveniently. The same machine type may equip with various power motors. It is easy to realize the combination and junction between every machine type
5. Form of installation: The position to be installed is not limited
6. High strength, compact the box body of high strength cast iron, gear and gear shaft adopt the gas carbonization, quenching, and fine grinding process, therefore the bearing capacity of unit volume is high
7. Long life: Under the condition of the correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life of the main parts speed reducer(except wearing parts)should not be less than 20000 hours
8. Low noise: Because the main parts of the speed reducer are processed, and tested critically, therefore the noise of the speed reducer is low

Product Specifications

ITEM HN-311
Ratio 1:3
Teeth 36/12
Module 4.35
Power 50
Rated Input 540rpm
Input/Output Description 1 3/8 Z6 
Optic axis
Weight(N.W) 21Kg

Packaging & Shipping

Certifications

 

 

Company Profile

HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like  Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.

FAQ

1.WHAT’S THE PAYMENT TERM?

When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.  

2.HOW TO DELIVER THE GOODS TO US?

Usually we will ship the goods to you by sea.

3.How long is your delivery time and shipment?

30-45days

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Tillage, Harvester, Planting and Fertilization, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Tillage, Harvester, Planting and Fertilization
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase, Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase, Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Right Angle, Right Angle
Hardness: Hardened Tooth Surface, Hardened Tooth Surface
Installation: Horizontal Type, Horizontal Type
Step: Double-Step, Double-Step
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agriculturalparts

Choosing an Agricultural Gearbox

An agricultural gearbox is an important part of your machine, especially if it is geared to change the speed, direction, or rotation of the machine. The CZPT Gearbox Company manufactures high-performance agricultural gearboxes to maximize the performance of a farmer’s machine. These gearboxes can be reverse-engineered to work with existing designs or customized to meet the specific requirements of your machine. As the heart of your machine, these gearboxes can help you maximize the efficiency and productivity of your machines.

Bevel gearbox

When selecting an agricultural gearbox, make sure to consider the durability of the product. The quality of materials, the design of the mechanism, and functionality of the device will all affect its lifespan. Look for products that can withstand repeated use and will last for many years, as opposed to requiring frequent repairs or replacements. If the device is designed to last a long time, you can save a great deal of money by purchasing a long-lasting version.
A Bevel gearbox is a one-stage, single-stage unit that incorporates spiral and straight bevel gears to transmit rotational power. It is widely used in agricultural machinery, and is available in a wide variety of ratios, horsepower capacity, and configuration angles. One company, CZPT Gearbox, offers a 50deg bevel gear drive, suitable for use in portable grain auger and elevator applications.
The assembly of a bevel gearbox is made up of two sleeves: a lower bevel gear angular gear 3 and an upper bevel gear angle gear 2. Both sleeve assemblies are connected to the tractor’s frame through a mounting bracket. A profiled pin 31 is fixed to the cardan shaft via a threaded bore. This is the pivoting mechanism that allows the upper bevel gear angular gear 2 to pivot relative to the lower bevel gear angular gear 3.
Spiral bevel gears are similar to bevel gears, but have a much higher degree of total coverage. They are more expensive to manufacture and are only suitable for larger agricultural equipment. In addition, spiral bevel gears require more space than straight bevel gears. A spiral bevel gear is more efficient and quieter than a straight bevel gear. Its durability is another consideration. The best choice for your equipment depends on the overall application, speed, and torque requirements.
The bevel gear family is used as deflection gears in three directions. The deflection of rotational movement can take place at angles of 90deg, 120deg, or 135deg. Different types of drive wheels can be used as well, including simple screw drives. Bevel gearboxes can be purchased with standard mounts or in customized versions. Bevel gearboxes also come in aluminum housings.
agriculturalparts

Closed-loop seals

If the climate where you work or live is humid, a closed-loop seal for agricultural gearbox will prevent water from entering and damaging the components inside. A closed-loop seal is a better alternative to desiccant breathers because they keep the gearbox isolated from the atmosphere. This is very important because moisture can cause damage to the machinery and can affect the overall performance. A closed-loop seal is also made of elastomeric material and will not allow water to enter the gearbox.
An agricultural gearbox has many applications. They are essential to the production of agricultural products. The food chain depends on these gearboxes. Even a few minutes of downtime can affect the production of the entire food chain. Whether you need a gearbox for a lawnmower or an entire farming system, it is essential to find a high-quality agricultural gearbox with a closed-loop seal.
The environment in which agricultural equipment operates is notoriously harsh, which is why it is imperative to choose the most reliable and efficient closed-loop seals. Agricultural equipment operates in dusty and dirty conditions. That means the seals must be durable and effective, and they must prevent external media from getting in. The right seal will help the machinery operate at its highest level, and protect both the operator and the environment.
Gaskets are one of the most important components in a gearbox flange joint. When high compressive forces are set in these joints due to a critical load, gaskets start to fail. The gaskets lose their strength and leakage occurs. A gasket’s deformation also plays a major role in sealing performance. This is why detailed analysis is done to evaluate the effect of gasket thickness on deformation and von Mises stress.

Quality of materials

Agricultural gearboxes are an important component of all farming equipment. They are used in nearly every step of the cropping cycle, and are vital to an efficient operation. In addition to efficient performance, these gearboxes must be rugged enough to survive the harsh environments that farmers operate their machinery in. These challenges include continual operation, high and low temperatures, and operation in both moist and arid environments. Safety regulations also pose a unique set of challenges.
A line of high-quality agricultural gearboxes is a great choice. CZPT Gearbox Company manufactures a complete line of gear drives for a variety of agricultural applications. They even design custom gear drives for specific applications, from portable grain elevators to grain carts. These gear drives have a long service life and are competitively priced. They can be used on a variety of types of agricultural machinery, and the company’s engineers are experienced in every aspect of production.
A tractor’s gear box is commonly made of grey cast iron, which is durable and offers good machinability. The material is also vibration-dampening and has good wear resistance. Belt pulleys are typically cast iron and are primarily used for long-distance power transmission. The brake drum, on the other hand, needs to be made of a high-quality material with higher vibration resistance, which is why it must be made of grey iron ASTM A48 Class 35.
agriculturalparts

Durability

Agricultural gearboxes are important for all phases of the food production process. A single component failure can result in significant downtime, costing the farmer money. Hence, you should buy a quality agricultural gearbox. A durable gearbox is easy to maintain and can be accessed in case of problems. However, if you do not have time to maintain your gearbox, you may find it difficult to repair it yourself.
Regular oil changes are also vital for ensuring the longevity of agricultural gearboxes. Agricultural equipment gets dirty in the fields, which can lead to contamination of gearbox components. Improper lubrication causes damage-causing friction. To prevent such friction, change oil regularly. Check for signs of internal malfunctions, such as oil particles on gears or in the pinion shaft. Visual inspections will help you determine the troublesome symptoms before components fail. Symptoms include flaking, fatigue, and noises.
To ensure the durability of agricultural gears, a study was carried out. A 86-kW tractor was used to perform a field test using a gearbox simulation model. The test ended after 107 h, as there were operational and noise issues. A disassembly revealed that the range shift A and B gears had broken teeth. A study of the transmission’s operating parameters revealed that it could be improved by reducing the contact and bending stress.
CZPT Gearbox Company manufactures high-performance gearboxes for various agricultural applications. Their engineers can reverse engineer existing designs or develop custom gearboxes for specific requirements. Agricultural gearboxes are essential for maximizing the performance of farming machinery. They transmit power from an input shaft to an output shaft, enabling the change of rotation, speed, and direction. In other words, a gearbox can help you maximize the efficiency of your agricultural equipment.
China Professional Farm Equipment Gear Box Rotary Cultivator Agricultural Machinery Tractor Pto Gearbox   agricultural pto gearbox	China Professional Farm Equipment Gear Box Rotary Cultivator Agricultural Machinery Tractor Pto Gearbox   agricultural pto gearbox
editor by CX 2023-11-12

China factory Agricultural Tractor Pto Gearbox for Round Baling Machine and Cropper components of gearbox

Product Description

Agricultural Tractor PTO Gearbox for Round Baling Machine and Cropper

Product: Gear Box
Model: HZKLF246
Delivery Date: 7-90 Days
MOQ: 50 sets or according to stocks without minimum Qty.
Sample: Acceptable
We could produce all kinds of Gear Box according to customers’ requirement.

An agricultural gearbox and PTO shaft are a crucial part of a tractor. These mechanical parts are connected by yokes at
the front and back of the tractor and rotate between 540 and 1,000 rpm. A properly adjusted PTO propeller shaft reduces
the risk of damaging the engine. Most failures occur with the PTO shaft or gearbox clutch, so always check them to be
sure it is functioning properly. Maintaining the agricultural gearbox with proper lubrication is essential to minimize damaging
friction and keep it in tip-top shape. High-quality agricultural gearbox with features that will be durable enough for the type
of work you’ll be doing.

About us

 

We have more than 17 years experience of Spare parts, especially on Drive Line Parts. 

We deeply participant in the Auto Spare parts business in HangZhou city which is the most import spare parts production area in China.

 

We are supply products with good cost performance for different customers of all over the world.

We keep very good relationship with local produces with the WIN-WIN-WIN policy. 

Factory supply good and fast products;

We supply good and fast service;

And Customers gain the good products and good service for their customers. 

This is a healthy and strong equilateral triangle keep HangZhou Speedway going forward until now.

 

 

Application: Agricultural Machinery
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Three-Step
Rated Input: 540rpm-282rpm

agricultural gearbox

Lubrication Practices for Extending the Lifespan of Agricultural Gearboxes

Proper lubrication is essential for ensuring the longevity and optimal performance of agricultural gearboxes. Here are some essential lubrication practices that can help extend the lifespan of these gearboxes:

  • Choose the Right Lubricant: Select a high-quality lubricant specifically designed for gearboxes and agricultural machinery. Consider factors such as viscosity, temperature range, and load-bearing capacity to ensure compatibility with the gearbox’s operating conditions.
  • Regular Inspection: Perform regular visual inspections of the gearbox and lubricant to check for signs of contamination, wear, or inadequate lubrication. Address any issues promptly to prevent further damage.
  • Cleanliness: Maintain a clean environment around the gearbox to minimize the risk of dirt, debris, and moisture entering the gearbox housing. Contaminants can compromise the lubricant’s effectiveness and accelerate wear.
  • Lubricant Level: Monitor and maintain the proper lubricant level in the gearbox. Insufficient lubrication can lead to increased friction and heat, causing premature wear and potential damage to gears and bearings.
  • Replace Lubricant: Follow the manufacturer’s recommendations for lubricant change intervals. Over time, lubricants can degrade, lose their properties, and become contaminated. Regularly replacing the lubricant helps ensure optimal performance.
  • Use Lubrication Schedule: Create a lubrication schedule based on the gearbox’s usage and operating conditions. Stick to the recommended intervals for applying or changing lubricant to prevent under-lubrication or over-lubrication.
  • Appropriate Lubrication Method: Follow the manufacturer’s guidelines for the correct lubrication method, whether it’s through oil bath, grease, or automatic lubrication systems. Proper application ensures even distribution of lubricant across gear surfaces.
  • Temperature Considerations: Be aware of temperature variations in your operating environment. Extreme temperatures can affect lubricant viscosity and performance. Choose a lubricant that can handle the temperature range of your equipment.
  • Expert Advice: Consult the gearbox manufacturer or a lubrication specialist to determine the best lubrication practices for your specific agricultural gearbox model and application.

By adhering to these lubrication practices, farmers can maximize the lifespan of their agricultural gearboxes, minimize downtime, and ensure efficient and reliable operation of their equipment.

agricultural gearbox

Potential Challenges in Maintenance and Repairs of Agricultural Gearboxes

Maintenance and repairs of gearboxes in agriculture can pose several challenges:

  • Harsh Environments: Agricultural machinery operates in challenging environments with exposure to dirt, debris, moisture, and varying temperatures. These conditions can accelerate wear and corrosion, necessitating frequent maintenance.
  • Heavy Workloads: Gearboxes in farming equipment often handle heavy workloads, leading to increased stress on components. This can result in faster wear and tear, requiring more frequent inspections and part replacements.
  • Accessibility: Some gearboxes are located in hard-to-reach areas of machinery. This makes regular maintenance and repairs more challenging, as technicians may need specialized tools and equipment to access and service the gearboxes.
  • Specialized Knowledge: Proper maintenance of agricultural gearboxes requires specialized knowledge and skills. Inadequate understanding of gearbox mechanics and maintenance practices can lead to improper repairs, reducing the gearbox’s lifespan and efficiency.
  • Costs: Repairing or replacing gearbox components can be costly, especially for heavy-duty agricultural machinery. Farmers need to consider both the direct costs of parts and labor, as well as potential downtime during repair processes.
  • Downtime: The downtime required for gearbox maintenance or repairs can impact farming operations, especially during critical planting or harvesting seasons. Efficient scheduling and backup equipment can help mitigate this challenge.
  • Availability of Parts: Obtaining replacement parts for older or less common gearbox models can be challenging. Farmers may need to source parts from specialized suppliers, leading to potential delays in repairs.

Addressing these challenges requires proactive maintenance planning, regular inspections, proper training of maintenance personnel, and sourcing spare parts in advance.

agricultural gearbox

Types of Agricultural Gearboxes for Specific Tasks

Various types of agricultural gearboxes are designed to cater to specific tasks and applications in farming. These gearboxes are engineered to meet the unique requirements of different agricultural machinery and operations. Some common types of agricultural gearboxes include:

  • Rotary Mower Gearboxes: These gearboxes are used in rotary mowers and cutters. They transmit power from the tractor’s power take-off (PTO) to the blades, enabling efficient cutting of grass, crops, and vegetation.
  • Manure Spreader Gearboxes: Manure spreaders utilize specialized gearboxes to distribute manure evenly across fields. These gearboxes ensure consistent spreading of fertilizer while accommodating variable loads.
  • Harvesting Gearboxes: Gearboxes used in harvesting equipment, such as combines and harvesters, enable efficient gathering, threshing, and separating of crops from their stalks. These gearboxes handle high loads and varying operating conditions.
  • Seed Drill Gearboxes: Seed drills require gearboxes to distribute seeds accurately and at consistent intervals. These gearboxes ensure precise seed placement for optimal germination and crop growth.
  • Hay Rake Gearboxes: Hay rakes utilize gearboxes to gather and arrange hay into windrows for baling. These gearboxes help optimize the hay collection process.
  • Irrigation System Gearboxes: Agricultural irrigation systems may use gearboxes to control the movement and positioning of irrigation equipment, ensuring efficient water distribution across fields.
  • Tillage Equipment Gearboxes: Gearboxes used in tillage equipment, such as plows and cultivators, help break up soil, prepare seedbeds, and promote seedling emergence.
  • Tractor Gearboxes: Tractors may incorporate various gearboxes for tasks such as shifting gears, driving the power take-off, and operating attachments.
  • Grain Auger Gearboxes: Grain augers use gearboxes to facilitate the movement of harvested grain from one location to another, such as from a combine to a storage bin.

Each type of agricultural gearbox is designed with specific features, load capacities, and durability to suit the demands of its intended task. Manufacturers engineer these gearboxes to withstand the challenging conditions of agricultural operations while ensuring efficient and reliable performance.

China factory Agricultural Tractor Pto Gearbox for Round Baling Machine and Cropper   components of gearbox	China factory Agricultural Tractor Pto Gearbox for Round Baling Machine and Cropper   components of gearbox
editor by CX 2023-09-15

China Standard Agricultural 540rpm Pto Gearbox Km71024 for Agricultural Machinery gearbox and motor

Product Description

Agricultural 540rpm pto gearbox KM71571 for agricultural machinery

The  Gearboxes are designed for connecting gear pumps to farm tractor power take offs (PTO).Output speed of power take offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps.Different input running speeds can also be suitable,provided that the PTO gearbox output speed does not exceed 3000 rpm.

Gears
Made in Steel CHINAMFG 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.

Shafts
Made in steel CHINAMFG 16 CRN4.They are coupled with splined gears and are designed to stand the torque values stated in the catalogue.

Lubrication
SAE 90 gear oil must be put in the pto gearbox prior to use, change the oil after the first 60-80 hours and then every 12 months or 1500 hours which ever falls first.

Maintenance
Please check the oil level via the special oil window every 50 hours.Working temperatures should not exceed 120 degrees celcius under continuos duty cycle.

Drawing

Our Services

Service A: OEM and customized products are acceptable
Our company can do OEM and customized products according to the requirements of customer.

Service B: Develop new products is welcome
We have technicians and research department to make new products, if customers need us to develop new products according to sample or drawing, it is welcome.

Service C: Sourcing related producs
Our company have much experience in hydraulic and transmissions parts field, if you need other products, we can find for you.

Packaging & Shipping

Plastic bag packing for 1 piece / two pieces in 1 exporting carton / 100 cartons put on a pallet

FAQ

 

1.Q:Is your company a trading company or a manufacturer?

A:Our company is a trading company also a manufacturer, we have our own factory to produce gearbox, pump support..Etc

Also we distribute gear pumps, tractor machinery,dump truck pump  from selected premium suppliers to meet customers’ variable demand.

 

2.Q:What about the quality control and warranty ?

A:”Quality first, Customers foremost”.Every piece of products is cheeked and tested strictly 1 by 1 before packing and shipping.

Our products have 1 year warranty, technical support is endless from us.

 

3.Q:Can you provide samples for checking and testing?

A:Yes,we provide free samples for checking the build quality and real performance of our products,the freight need to be coverd by customer.

 

4.Q:How can I get to your company?

A:Our company address is No.888 Huaxu Road,Xihu (West Lake) Dis. district,ZheJiang ,China

It is about 30 minutes by car from ZheJiang Xihu (West Lake) Dis.ao airport or ZheJiang Xihu (West Lake) Dis.ao Railway station.

Type: Forest Machine
Usage: Agricultural Products Processing, Farmland Infrastructure
Material: Aluminum
Power Source: Hydraulic
Weight: 6.5kg
After-sales Service: 1 Year
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agricultural gearbox

Technological Advancements in Agricultural Gearbox Design

Advancements in agricultural gearbox design have significantly improved the efficiency, durability, and performance of farming equipment. Here are some notable technological advancements:

  • Materials and Manufacturing: The use of advanced materials, such as high-strength alloys and composite materials, has enhanced the durability and longevity of gearbox components. Precision manufacturing techniques, including computer-aided design (CAD) and computer numerical control (CNC) machining, ensure tight tolerances and reliable performance.
  • Gear Tooth Design: Modern gear tooth profiles, such as optimized helical and spiral bevel gears, reduce noise, vibration, and wear. Advanced tooth design also improves power transmission efficiency and load distribution.
  • Sealing and Lubrication: Improved sealing technologies, such as double-lip seals and labyrinth seals, help prevent contaminants from entering gearboxes while retaining lubricants. Advanced lubrication systems, including automatic lubrication and improved oil formulations, extend maintenance intervals and enhance efficiency.
  • Electronic Controls: Agricultural gearboxes increasingly integrate with electronic control systems. Sensors and actuators provide real-time data on gearbox performance, allowing for condition monitoring, predictive maintenance, and adjustments to optimize machinery operation.
  • Smart Gearboxes: Some agricultural gearboxes are equipped with smart features, such as load sensors, temperature monitors, and feedback systems. These features enhance precision, safety, and overall equipment performance.
  • Hybrid Power Transmission: Integration of hybrid power transmission systems, combining internal combustion engines with electric motors, allows for more efficient power delivery and reduced fuel consumption. Gearboxes play a crucial role in managing power distribution in these systems.
  • Reduced Environmental Impact: Advancements in gear design contribute to reducing environmental impact. Quieter and more efficient gearboxes minimize noise pollution and energy consumption while meeting emissions regulations.
  • Customization and Modularity: Some modern agricultural gearboxes offer modular designs that allow farmers to customize gear ratios, output speeds, and other specifications to match specific tasks and conditions.
  • Simulation and Testing: Computer simulations and advanced testing methods, such as finite element analysis (FEA) and computational fluid dynamics (CFD), help optimize gearbox design, reduce prototyping costs, and ensure reliability before production.

These advancements collectively contribute to the evolution of agricultural gearboxes, making farming machinery more efficient, environmentally friendly, and adaptable to the changing needs of modern agriculture.

agricultural gearbox

Factors to Consider When Selecting the Right Gearbox for Farm Machinery

Choosing the appropriate gearbox for farm machinery is crucial to ensure optimal performance and efficiency. Here are the key factors to consider when selecting the right gearbox:

  • Power and Torque Requirements: Assess the power and torque needed for the specific task the machinery will perform. Select a gearbox that can handle the required load without straining the components.
  • Speed Variation: Determine if the machinery requires variable speed control for different tasks. Some gearboxes offer adjustable speed options to match varying conditions and applications.
  • Task Compatibility: Ensure that the chosen gearbox is compatible with the implements and attachments the machinery will use. Different tasks may require different gear ratios and torque capabilities.
  • Efficiency: Opt for gearboxes known for their efficiency in power transmission. Efficient gearboxes minimize energy losses and maximize the output of the machinery.
  • Durability: Farming environments can be demanding, so select a gearbox that is built to withstand the conditions, such as exposure to dirt, moisture, and impacts.
  • Size and Weight: Consider the available space and weight limits on the machinery. Choose a gearbox that fits within these constraints without compromising performance.
  • Maintenance: Evaluate the maintenance requirements of the gearbox. Gearboxes that are easy to maintain and service can minimize downtime and keep the machinery running smoothly.
  • Cost: Balance the initial cost of the gearbox with its long-term benefits and performance. Investing in a quality gearbox can lead to better overall cost-effectiveness over time.
  • Compatibility: Ensure that the gearbox is compatible with the power source (such as the tractor’s power take-off) and other components of the machinery.
  • Manufacturer Reputation: Choose gearboxes from reputable manufacturers with a history of producing reliable and high-quality agricultural machinery components.

By carefully considering these factors, farmers can select the right gearbox that meets the specific needs of their farm machinery, leading to enhanced efficiency, productivity, and longevity of equipment.

agricultural gearbox

Power Transmission in Farming Equipment with Agricultural Gearboxes

Agricultural gearboxes play a vital role in facilitating power transmission within various types of farming equipment. These gearboxes are integral components that enable the transfer of rotational power from a tractor’s engine to different agricultural implements and machinery. Here’s how agricultural gearboxes contribute to power transmission:

  • Speed Reduction: In many farming operations, the engine of a tractor or other power source operates at a higher speed than is suitable for the optimal functioning of agricultural implements. Agricultural gearboxes provide speed reduction by using a combination of gears with different numbers of teeth. This reduction in speed allows the machinery to operate at the required speed for efficient tasks like tilling, planting, or harvesting.
  • Power Multiplication: Some agricultural tasks require a significant amount of torque to operate effectively. Gearboxes can multiply the input torque from the engine to generate higher torque at the output shaft. This is crucial for tasks such as plowing, where substantial force is needed to break up the soil.
  • Directional Change: Agricultural gearboxes also allow for changes in the direction of power transmission. For instance, a tractor’s power take-off (PTO) shaft may need to transmit power at a right angle to the tractor’s engine. Gearboxes with bevel gears or other arrangements enable this change in direction, ensuring that power is properly directed to the implement.
  • Power Distribution: In certain cases, power needs to be distributed to multiple components or implements. Agricultural gearboxes with multiple output shafts can distribute power to different tasks simultaneously, optimizing efficiency and productivity.
  • Attachment Operation: Many agricultural implements, such as plows, seed drills, and rotary mowers, require consistent and controlled power to function effectively. Gearboxes provide the necessary power and control to these attachments, ensuring uniform operation and accurate results.

By facilitating speed reduction, power multiplication, directional changes, power distribution, and attachment operation, agricultural gearboxes contribute significantly to the overall efficiency and productivity of farming equipment. They allow farmers to adapt their machinery to various tasks, optimize power usage, and achieve better results in different agricultural operations.

China Standard Agricultural 540rpm Pto Gearbox Km71024 for Agricultural Machinery   gearbox and motor	China Standard Agricultural 540rpm Pto Gearbox Km71024 for Agricultural Machinery   gearbox and motor
editor by CX 2023-09-15

China manufacturer 170 CV – 125 Kw 1: 1.53 1 3/8 Z6 Pto Increasor Agricultural Gearbox with Overrunning Clutch (2155+RL) gearbox design

Product Description

Specification OF PTO GEARBOX —Speedway:

We developed and produced many tractor spare parts for European Tractors .

Tractor Model we can supply: B1500/1400,B5000,B6000, B7000, TU1400, TX1400, TX1500, YM F1401, YM1400 ETC.

The parts for example: Gearboxes, Tyres, rim Jante, Kit coupling KB-TX 3 point linkage. Exhaust pipe Steering wheel. Kit coupling YM F14/F15, gear shaft, PTO shaft, PTO cardan, key, regulator ect.

Most of the spare parts are with stock. If you are interested in, please feel easy to contact me.
 

Other relevant parts for cars or machinery we have made in our workshop are as follows:
Drive shaft parts and assemblies,
PTO GEARBOX,
Universal joint parts and assemblies,
PTO drive shafts,
Spline shafts,
Slip yokes,
Weld yokes,
Flange yokes,
Steering columns,
Connecting rods,
etc.

Product Description

 Pto Drive Gearbox  Item:
 

Name

PTO GEARBOX REDUCER FOR Large square bundle, big pack machine for Farm

Advantage

No matter you’re cutting brush or mowing pastures, we has the rotary cutter gearbox to fit your
needs.

Material available

Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.
 

Surface treatment

 

Blacking, galvanization, chroming, electrophoresis, color painting, …

Heat treatment

 

High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …

 

 

Company Profile

 

 

 

 

Certifications

 

FAQ

Application: Machinery, Agricultural Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction, Speed Increase
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Type: Planetary Gear Box
OEM: Accepable
Samples:
US$ 5000/Piece
1 Piece(Min.Order)

|
Request Sample

agricultural gearbox

Using Agricultural Gearboxes in Specialized Tasks: Tilling and Planting

Agricultural gearboxes are versatile components that play a crucial role in various farming operations, including specialized tasks such as tilling and planting. Here’s how agricultural gearboxes are utilized in these tasks:

  • Tilling: Tilling is an essential step in preparing the soil for planting. Agricultural gearboxes are used in tractor-mounted tillers to drive the rotating tines that break up and turn over the soil. The gearbox’s high torque capabilities and power transmission efficiency allow the tiller to work effectively even in tough soil conditions. Adjustable gear ratios in the gearbox enable operators to control the tiller’s speed and penetration depth, optimizing soil preparation.
  • Planting: Precision planting requires accurate seed placement and spacing to maximize crop yield. Agricultural gearboxes are integrated into planting equipment to drive mechanisms that distribute seeds evenly at the desired depth. The gearbox’s ability to transmit power with precision ensures consistent seed placement, contributing to uniform germination and plant growth. Some gearboxes in planting equipment also offer variable speed options, allowing farmers to adjust planting rates based on seed types and field conditions.

By enabling efficient power transmission and offering customizable speed and torque settings, agricultural gearboxes enhance the effectiveness of specialized tasks like tilling and planting. Farmers can rely on these gearboxes to achieve optimal soil preparation and planting accuracy, ultimately contributing to higher crop yields.

agricultural gearbox

Factors to Consider When Selecting the Right Gearbox for Farm Machinery

Choosing the appropriate gearbox for farm machinery is crucial to ensure optimal performance and efficiency. Here are the key factors to consider when selecting the right gearbox:

  • Power and Torque Requirements: Assess the power and torque needed for the specific task the machinery will perform. Select a gearbox that can handle the required load without straining the components.
  • Speed Variation: Determine if the machinery requires variable speed control for different tasks. Some gearboxes offer adjustable speed options to match varying conditions and applications.
  • Task Compatibility: Ensure that the chosen gearbox is compatible with the implements and attachments the machinery will use. Different tasks may require different gear ratios and torque capabilities.
  • Efficiency: Opt for gearboxes known for their efficiency in power transmission. Efficient gearboxes minimize energy losses and maximize the output of the machinery.
  • Durability: Farming environments can be demanding, so select a gearbox that is built to withstand the conditions, such as exposure to dirt, moisture, and impacts.
  • Size and Weight: Consider the available space and weight limits on the machinery. Choose a gearbox that fits within these constraints without compromising performance.
  • Maintenance: Evaluate the maintenance requirements of the gearbox. Gearboxes that are easy to maintain and service can minimize downtime and keep the machinery running smoothly.
  • Cost: Balance the initial cost of the gearbox with its long-term benefits and performance. Investing in a quality gearbox can lead to better overall cost-effectiveness over time.
  • Compatibility: Ensure that the gearbox is compatible with the power source (such as the tractor’s power take-off) and other components of the machinery.
  • Manufacturer Reputation: Choose gearboxes from reputable manufacturers with a history of producing reliable and high-quality agricultural machinery components.

By carefully considering these factors, farmers can select the right gearbox that meets the specific needs of their farm machinery, leading to enhanced efficiency, productivity, and longevity of equipment.

agricultural gearbox

Benefits of Using High-Quality Gearboxes in Agricultural Machinery

Utilizing high-quality gearboxes in agricultural machinery offers several advantages that contribute to enhanced performance, durability, and overall operational efficiency. Here are the key benefits:

  • Reliability and Durability: High-quality gearboxes are built to withstand the demanding conditions of agricultural operations. They are constructed using durable materials, precise manufacturing techniques, and stringent quality control measures, ensuring a longer lifespan and reduced downtime due to breakdowns.
  • Optimal Power Transmission: High-quality gearboxes facilitate efficient power transmission from the tractor’s engine to various implements. They minimize power losses through well-designed gear profiles, accurate alignments, and minimal friction, allowing for more effective utilization of available power.
  • Smooth Operation: Gearboxes manufactured to high standards provide smooth and consistent operation. They reduce vibrations, noise, and unnecessary wear, creating a comfortable working environment for the operator and reducing stress on the machinery.
  • Precision and Accuracy: Quality gearboxes offer precise control over speed, torque, and direction changes. This precision ensures accurate implementation of farming tasks, such as seeding, planting, and harvesting, leading to better yield outcomes.
  • Increased Efficiency: High-quality gearboxes minimize energy losses due to friction and inefficient gear meshing. This improved efficiency results in better fuel economy and optimized power utilization, reducing operating costs for the farmer.
  • Compatibility and Adaptability: Top-tier gearboxes are designed to be compatible with a range of agricultural implements and machinery. Their adaptability allows farmers to switch between different tasks without the need for frequent adjustments or component changes.
  • Reduced Maintenance Costs: Quality gearboxes require less frequent maintenance and repair. Their robust construction and precision engineering result in fewer breakdowns and extended maintenance intervals, saving both time and money.
  • Enhanced Safety: Reliable gearboxes contribute to safer operations by preventing sudden failures that could lead to accidents. The smooth operation and predictable performance of high-quality gearboxes reduce the risk of mishaps during agricultural tasks.

Overall, investing in high-quality gearboxes for agricultural machinery ensures improved reliability, smoother operation, higher precision, increased efficiency, and reduced maintenance costs. These benefits ultimately contribute to enhanced productivity and better outcomes for farmers and agricultural operations.

China manufacturer 170 CV - 125 Kw 1: 1.53 1 3/8 Z6 Pto Increasor Agricultural Gearbox with Overrunning Clutch (2155+RL)   gearbox design		China manufacturer 170 CV - 125 Kw 1: 1.53 1 3/8 Z6 Pto Increasor Agricultural Gearbox with Overrunning Clutch (2155+RL)   gearbox design
editor by CX 2023-09-14

China Professional Pto (Power Take Off) for DFAC (Dongfeng Truck) Duolika Sdq25-67lgq1 Transmission Gearbox 1700010-C22112 Teeth 25 automatic gearbox

Product Description

PTO (Power Take Off)  for DFAC (Xihu (West Lake) Dis.feng Truck ) Duolika  SDQ25-67LGQ1 For Transmission Gearbox  170571-C22112  /5.5 Teeth 25 

Xihu (West Lake) Dis.feng Truck Part Assembly 
 Gearbox PTO 
 POWER TAKE-OFF UNIT
 

Detailed Photos

Xihu (West Lake) Dis.feng DFAC Truck Power Take off (PTO Assembly)Xihu (West Lake) Dis.feng (DFAC DFCVTruck PtoImages of Xihu (West Lake) Dis.feng Truck Pto

Images of Xihu (West Lake) Dis.feng Truck Pto

Xihu (West Lake) Dis.feng DFAC Truck Power Take off

Power Take Off (PTOfor China trucks

DFAC Duolika PTO SDQ25-67LGQ1 For Gearboox 170571-C22112/5.5   Teeth numbers 25 

Images of Dfac Duolika Pto For Gearboox 170571-c22112

 

Product Description

FAW Truck power take off (FAW)

Jac Truck Xingrui series power take off (JAC)

WanLiYang series power take off (WLY)

ISUZU Truck power take off (ISUZU PTO)

SINOTRUCK CHINAMFG PTO power take off
JMC Truck power take off (JMC PTO)

FOTON  Truck power take off (FOTON  PTO)
New energy Electric series power take off

Vacuum control PTO

Pneumatic control PTO

Electric control PTO

Remote manual PTO

 

 

 Fast Power Take-off ( PTO) For Hydraulic Gear Pump Crane ,( Oil  Pump ,Fuel Pump Tanker Bowser Special Vehicle Gearbox PTO )  Assembly CHINAMFG CHINAMFG truck transmission gearbox power take off QD60 PTO
China Truck Power Take-off PTO Assembly ( Fast 8JS85E 9JS119TA RTO-11609B RT-11509F 12JS160TA 12JD160TA 12JD180TGearbox Transmission SDQ211/70 )

 
A detailed description of the original production and operation of the full power take-off device with sandwich type power take-off is described.
Sandwich type Power take-off List of main technical parameters
Serial number Map number Total speed ratio Rated power Maximum output torque Output interface form Output interface location size Indication switchform gas Pipe interfacesize AdaptationTransmission Model
One QJQ01-571 0.702 160kW 6-01 connector.    

 

 

Tell: tictrucks HangZhou City ZheJiang Province China
Gearbox Factory Gearbox Transmission Model
tictrucks
SZ OBM Model Brief data PTO
PTO ODM MODEL Truck brand
HaChi Gearbox C171757121-8C CA6-75AB19 CATS6-62 CA6T-123 6T120 JS6-550 TS6-53(Direct) -8C SDQ12/68 FAW
HangZhou C1   FAW
HaChi Gearbox TZ17-449 CA6T-138(FAW Eaton) 6-74 SDQ15/75 FAW
Xihu (West Lake) Dis.feng 17V20 17V70–Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B   SDQ23/30 Furika
LG LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 525 SDQ23/32 FOTON Furika
SDQ33/32
YY SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 1061 SDQ23/37 FOTON Furika
WLY WLY5TS32-73–LD4-90651 17KW1-N9-N9-Q17421
LC JAC 2830.5   SDQ42/27 IVECO NAVECO
LC JAC LC6T35   SDQ50/35 JAC
LC JAC LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) 646 SDQ50/45 FOTON AUMARK
WLY WLY6S46 646 SDQ50/69
LC JAC LC6T540 15CO7571   SDQ50/63 JAC
LC JAC LC5T97 LC5T30( 6teeth) 5T97 SDQ50/71
LC JAC LC5T400M1(A2Q08) 5T35 SDQ50/74 FOTON Oling
  NISSAN ZF5S400V   SDQ51/44 NISSAN
ZheJiang MSB-5M(A2Q05) LC5T88(6 teeth) ISUZU QINGLING SDQ51/62 ISUZU QINGLING
ZheJiang MSB-5M(A2Q05) LC5T88(6 teeth) ISUZU QINGLING SDQ51/63 ISUZU QINGLING
  DN3-70030-E0 6MT1420 DN3 SDQ51/65 ISUZU QINGLING
ISUZU QINGLING MSB-5S/5M/5SM 5MT1280JD JC526T3D 1571 5T88 SDQ51/74 JMC small
WLY WLY5TS32C-58-32 Xihu (West Lake) Dis.feng
WLY5TS32-31-32 Xihu (West Lake) Dis.feng
HangZhou JC528T8 1571 5T88 SDQ51/67 JMC
ZheJiang ISUZU MRB6P( EURO3)   SDQ52/74 ISUZU QINGLING
ZheJiang MRB6Q MLD6Q 5T ISUZU SDQ52/77 ISUZU QINGLING
FAST 8JS85E 17JK-G18569(JiangKai) 85E QD40A FAST, Xihu (West Lake) Dis.feng
RT-11609A RT-11509C   SDQ211/70-A Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IVECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN
 Xihu (West Lake) Dis. Runze Special Vehicle
17G0A9-22 9JS135T-B   SDQ211/70-1
9JS119T-B(170571-K14E3)   SDQ211/70-3
9JS119TA   SDQ211/70-4
RTO-11609B RT-11509F   SDQ211/70-5
12JS160TA   SDQ212/70-1 Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IVECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN
12JD160TA 12JD180T   SDQ212/70-2
  A5J38T   QC20A FOTON
NAVECO 17H30   tictrucks IVEVO NAVECO

Power take-off products

 

Model list of power take-off 

FAW Xihu (West Lake) Dis. power take off (FAW  PTO)

 

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-YQ12/68

1.24

250

CA6T-123/TS6-53

Internal spline / flange

Pneumatics

2

SDQ-YQ12/72

1.199

250

CA6T-123/TS6-53

Internal spline / flange

Pneumatics

3

SDQ-YQ13/70

1.08

300

CATS6-75A/1700940-680

Internal spline / flange

Pneumatics

4

SDQ-YQ15/75

1.006

350

CATS6-75(74),

TZ1700940H4G,CA6T-138

Internal spline / flange

Pneumatics

5

SDQ-YQ15/52

1.179

400

CA6T138

Internal spline / flange

Pneumatic (dynamic clutch)

Xihu (West Lake) Dis.feng series power take off (DF PTO)

 

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-DF21/33

1.044

250

17C-00030,17G0A4-08,

Internal spline / flange

Pneumatics

2

SDQ-DF22/47

1.2

600

Dt0690 overdrive

Internal spline / flange

Pneumatics

3

SDQ-DF22/47-A

1.03

600

Dt0690 overdrive

Internal spline / flange

Pneumatics

4

SDQ-DF24/42

1.2

600

DF6S900

Internal spline / flange

Pneumatics

5

SDQ-DF24/42-B

1.03

450

DF6S900

Internal spline / flange

Pneumatics

6

SDQ-DF24/45

1.2

600

DF6S900

Internal spline / flange

Pneumatics

7

SDQ-DF24/45-B

1.03

450

DF6S900

Internal spline / flange

Pneumatics

8

SDQ-DF24/65

1.06

400

DF6S-750

Internal spline / flange

Pneumatics

9

SDQ-DF24/64

1.06

400

DF6S750/DF6S650

Internal spline / flange

Pneumatics

 

10

 

SDQ-DF24/69

 

1.211

 

350

17K1/17KT6K-00030,

17K17-00030/17G1A7-15,

17K23-00030/17G0A7-15

Internal spline / flange

Pneumatics

 

11

 

SDQ-DF25/63

 

1.23

 

350

17G1A7-41/17F40(44/62)

/17g0a7-21 (41) / jiangft 650H

Internal spline / flange

Pneumatics

 

12

 

SDQ-DF26/31

 

1.45

 

350

DC6J70T/17G0A3-08(09/15/

25/96)/Zqc6t-75 / 750

Internal spline / flange

Pneumatics

 

 

13

 

 

SDQ-DF27/21

 

 

1.845

 

 

350

DC85JTZ/17G0Z56-571/17G 0A3-33(35/36)/17G571-N9

002/14G0A3-32(34)

/DC6J85TZ

 

 

Internal spline / flange

 

 

Pneumatics

 

14

 

SDQ-DF27/53

 

1.35

 

350

17G0A9-Z67D/DC7J100TB/1

7G0A9-45(-24-00030)

Internal spline / flange

Pneumatics

15

SDQ-DF27/55

1.216

300

17g0a3-32 (33 / 34 / 35 / 36) straight

Connecting gear / dc6j85tz (direct gear)

Internal spline / flange

Pneumatics

16

SDQ-DF27/65

1.07

350

DC7J100TC,17G0A9-Z66D

Internal spline / flange

Pneumatics

17

SDQ-DF27/66

1.26

350

Dc6j85tz (overdrive)

/17G0A3-54/170571-A9000

Internal spline / flange

Pneumatics

18

SDQ-DF28/55

1.3

400

17GOA3-38/17N29-00030

Internal spline / flange

Pneumatics

19

SDQ-DF28/65

1.55

350

Dc7j120tb (overdrive)

/01-00030

Internal spline / flange

Pneumatics

 

20

 

SDQ-DF28/72

 

1.84

 

350

Dc7j120tc (direct gear)

/01-00030

Internal spline / flange

Pneumatics

Jac Xingrui series power take off (JAC)

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-XR50/35

1

300

LC6T55 WLY6TS55

Internal spline / flange

Pneumatics

2

SDQ-XR50/45

1.1

280

LC6T46/LC6T450

Internal spline / flange

Pneumatics

3

SDQ-XR50/60

1.1435

300

LC6T540

Internal spline / flange

Pneumatics

4

SDQ-XR50/63

1.11

300

LC6T540/15CO7571

Internal spline / flange

Pneumatics

5

SDQ-XR50/65

1.6433

250

ML642A-A9

Internal spline / flange

Pneumatics

6

SDQ-XR50/67

1.1541

250

ML532A

Internal spline / flange

Pneumatic / manual

7

SDQ-XR50/69

1.1

280

LC6T46/LC6T450

Internal spline / flange

Pneumatics

8

SDQ-XR50/71

1.17

200

LC5T97/LC5T30

Internal spline / flange

Pneumatics

9

SDQ-XR50/74

1.03

200

LC5T35/LC5T40

Internal spline / flange

Pneumatics

10

SDQ-XR23/55

1.12

300

LC6T450M1

Internal spline / flange

Pneumatic / manual

11

SDQ-XR37/77

1.55

200

ML532C

Internal spline / flange

Pneumatic / manual

Qingling CHINAMFG series power take off (Isuzu PTO)

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-WS51/62

1.3

150

Msb-5m / starray lc5t88

Internal spline / flange

Pneumatics

2

SDQ-WS38/63

1

150

Msb-5m / starray lc5t88

Internal spline / flange

Pneumatic / manual

3

SDQ-WS32/64

1.095

300

MYY-6S

Internal spline / flange

Pneumatic / manual

 

4

 

SDQ-WS35/74

 

1.63

 

180

MSB-5M/MSB-5S/MSB-5SM/LC5T88

 

LC5T25/LC5T255M3/LC5T28

 

Internal spline / flange

Pneumatic / manual vacuum

5

SDQ-WS52/77

1.18

250

MLD-6Q/MLD6A

Internal spline / flange

Pneumatics

JMC series power take off

 

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-GT32/65

1.26

250

6MT1420/DN3-70030-E0/KN3

Internal spline / flange

Pneumatic / manual

2

SDQ-GT51/67

1.2

200

JC5T28/5T26.5/MTI280JD

Internal spline / flange

Pneumatic / manual

3

SDQ-GT32/65-A

1.315

250

6MT1420/DN3-70030-E0/KN3

Internal spline / flange

Pneumatic / manual

4

SDQ-GT32/65-B

1.09

250

6MT1420/DN3-70030-E0/KN3

Internal spline / flange

Pneumatic / manual

5

SDQ-GT32/65-C

1.26

250

6MT1420/DN3-70030-E0/KN3

Internal spline / flange

Pneumatic / manual

ZF series power take off

 

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-ZF51/38

1.077

300

ZF6S500/ZF6S600/ZF6S558

ZF6S508/ZF6S458

Internal spline / flange

Pneumatics

2

SDQ-ZF51/44

1

250

ZF5S400

Internal spline / flange

Manual

3

SDQ-ZF48/39

1.063

250

ZF5S408/ZF5S328

Internal spline / flange

Pneumatics

4

SDQ-ZF211/65

0.772

650

TraXon12

Internal spline / flange

Pneumatics

Fast PTO power take off

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-FS212/70

0.94

600

12JSD160TA

Internal spline / flange

Pneumatics

2

SDQ-FS212/70-A

0.78

600

12JSD160TA

Internal spline / flange

Pneumatics

3

SDQ-FS19/31

(QD40A)

1.09

400

8JS75

Internal spline

Pneumatics

4

SDQ-FS24/37

( QCZ70A)

0.93

600

6J80T

Internal spline / flange

Pneumatics

5

SDQ-FS211/60

1.1

350

6DS40TB-D/6DS60TB-D

Internal spline / flange

Pneumatics

 

6

 

SDQ-FS211/70

 

0.94

 

600

Fuller / fast / rt-11509c

8JS100S/17G0A9-22

Internal spline / flange

Pneumatics

 

7

 

SDQ-FS211/70-A

 

0.78

 

600

Fuller / fast / rt-11509c

8JS100S/17G0A9-22

Internal spline / flange

Pneumatics

8

SDQ-FS34/29

 

400

8JS75

Internal spline / flange

Pneumatics

WanLiYang series power take off (WLY PTO)

 

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-WL24/37

1.176

250

10H30

Internal spline / flange

Pneumatics

2

SDQ-WL24/38

1.077

300

6G55

Internal spline / flange

Pneumatics

3

SDQ-WL24/40

1.333

300

6G40A

Internal spline / flange

Pneumatics

4

SDQ-WL31/39

1.1

300

6G40A

Internal spline / flange

Pneumatics

5

SDQ-WL24/43

1.087

300

5G40

Internal spline / flange

Pneumatic / manual / vacuum

6

SDQ-WL24/44

1.043

300

6G40B

Internal spline / flange

Pneumatics

7

SDQ-WL24/59

1.094

300

6G120/6G70

Internal spline / flange

Pneumatics

8

SDQ-WL24/60

1.3

300

6TS40

Internal spline / flange

Pneumatics

9

SDQ-WL24/63

1.39

180

5TS32

Internal spline / flange

Pneumatic / manual

10

SDQ-WL 24/63-B

1.39

180

5G32A

Internal spline / flange

Pneumatic / manual

11

SDQ-WL 24/66

1.359

180

5TS32-C

Internal spline / flange

Pneumatic / manual

12

SDQ-WL 24/66-B

1.146

180

5G32B/5G32C

Internal spline / flange

Pneumatic / manual

13

SDQ-WL 24/67

SDQ-WL 25/67

1.147

300

6T120/6S46/6S51

Internal spline / flange

Pneumatics

14

SDQ-WL 24/70

1.15

200

6S46B (2015-4-25)

Internal spline / flange

Pneumatic / manual

15

SDQ-WL 24/71

SDQ-WL 25/71

1.11

300

6S51B/6S46B

Internal spline / flange

Pneumatic / manual

16

SDQ-WL 24/72

1.133

300

6TS55E/6TS60

Internal spline / flange

Pneumatic / manual

17

SDQ-WL23/63

1.35

350

10H46

Internal spline / flange

Pneumatics

18

SDQ-WL23/71

1.15

400

7TS60

Internal spline / flange

Pneumatics

19

SDQ-WL24/75

1

400

7TS60B

Internal spline / flange

Pneumatics

20

SDQ-WL25/70

1.244

400

7TS60C

Internal flange / spline

Pneumatics

21

SDQ-WL24/73

1.07

400

7TS60D

Internal spline / flange

Pneumatics

22

SDQ-WL25/33

1.228

350

10h46 (right)

Internal spline / flange

Pneumatics

23

SDQ-WL27/70

1.08

150

5TS40

Internal spline / flange

Pneumatics

24

SDQ-WL31/46

1.2

180

5TS40

Internal spline / flange

Pneumatics

25

SDQ-WL211/100

1

1000

9G90

Internal spline / flange

Pneumatics

SINOTRUCK CHINAMFG PTO power take off

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-ZD27/61

1.1

600

DC7J120T

Flange flange

Pneumatic (dynamic clutch)

2

HW50

0.739

500

HW14710/HW18710

HW15710/HW19710

Internal flange / spline

Pneumatics

3

HW70

0.793

700

HW18709/HW18710

Internal spline / flange

 

4

HW80Q-F301

 

800

HW9571C1

Flange flange

Pneumatics

5

HW140Q-F301

0.84

1400

HW12706

Flange flange

Pneumatics

6

HW140Q-F302

0.84

1400

HW12706

Flange flange

Pneumatics

7

HW140Q-F303

0.84

1400

HW12706

Flange flange

Pneumatics

8

HW140Q-F305

0.84

1400

HW12706

Flange flange

Pneumatics

9

HW60Q-F300

0.686

600

HW12706

Flange flange

Pneumatics

Other series of power take-off

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-HL211/65

0.772

650

Soda gearbox 12sob1500

Internal spline / flange

Pneumatics

2

SDQ-HL211/100

1

1000

Soda gearbox 12sob1500

Internal spline / flange

Pneumatics

3

SDQ-NQ42/26

1.15

150

NAC 2830.5

Internal spline / flange

Pneumatics

4

SDQ-NQ42/27

1.15

150

NAC 2830.5

Internal spline / flange

Pneumatics

5

SDQ-SQ42/77

1.13

300

SAIC sc50m6d

Internal spline / flange

Pneumatics

New energy  Electric Power Truck series power take off PTO

Serial number

Model of power take-off

speed ratio

Output torque (N.m)

Matching gearbox

Output mode

control mode

1

SDQ-LK31/38

1.043

300

HangZhou green control 6s100

Internal spline / flange

Pneumatics

2

SDQ-LK24/36

1.136

300

HangZhou green control j6s95

Internal spline / flange

Pneumatics

3

SDQ-LK20/56

1.148

300

HangZhou green control j2s130

Internal spline / flange

Pneumatics

Export series power take off

Serial number

Model of power take-off

speed ratio

Output torque

(N.m)

Matching gearbox

Output mode

control mode

1

Pto1000 series

0.6- 1.88

300

EATON FS 3005/4005

EATON 6305

Internal flange / spline

Pneumatics

 

 

 

2

 

 

 

Pto2000 series

 

 

 

0.6- 1.88

 

 

 

350

Eaton fuller CHINAMFG rt-11109a / rt-6609a rt-7608a

Allison Ellison

M-5600/M-6600/S-5600 S-6600

 

 

 

Internal spline / flange

 

 

 

Pneumatics

3

3131(BZ)

0.84-2.9

4

450

Allison Ellison

MD-3000/MD-4000

Internal spline / flange

Hydraulic (dynamic clutch)

 

4

3252(BZ)

0.81-1.8

5

 

300

Allison Ellison

MD-3000/MD-4000

Internal spline / flange

Hydraulic (dynamic clutch)

 

5

3151(BZ)

 

0.84-2

 

540

Allison Ellison

MD-3000/MD-4000

Internal spline / flange

Constant mesh

 

6

 

3300

 

0.74-1

 

390

Allison Ellison

MD-1000/MD-2000

Internal spline / flange

Hydraulic (dynamic clutch)

7

PTO852

1.13

650

Allison

Internal spline / flange

Hydraulic (dynamic clutch)

 

 

8

 

 

103K_03(BZ)

 

 

0.77-0.55

 

 

650

ZF ZF

S5-50/90

S6-65/66/70/75/80/90 6S-800/1000/1005/1200

 

 

Flange flange

 

 

Pneumatics

 

 

9

 

 

1571K_03 (BZ)

 

 

0.76

 

 

420

ZF ZF

S5-50/90

S6-65/66/70/75/80/90 6S-800/1000/1005/1200

 

 

Flange flange

 

 

Pneumatics

 

Gearbox manufacturer code (see Table 1 for details) 

Gearbox manufacturer code

Code

Explain

Code

explain

WS

ZheJiang CHINAMFG gearbox Co., Ltd

ZD

Sinotruk HangZhou gearbox Co., Ltd

ZF

HangZhou ZF CHINAMFG gearbox Co., Ltd

FS

ZheJiang Fashite automobile transmission Co., Ltd

AS

Allison transmission Co., Ltd

SQ

ZheJiang Automotive Transmission Co., Ltd

ET

Eaton (ZheJiang ) gearbox Co., Ltd

NQ

HangZhou Automobile Gearbox Co., Ltd

DF

Xihu (West Lake) Dis.feng (HangZhou) gearbox Co., Ltd

LK

HangZhou lvkong transmission Co., Ltd

YQ

Gearbox branch of CHINAMFG Xihu (West Lake) Dis. transmission division

HL

ZheZheJiang oda transmission Co., Ltd

HY

HangZhou CHINAMFG automobile transmission Co., Ltd

GT

Getrac (ZheJiang ) transmission system Co., Ltd

WL

ZHangZhoug WanLiYang Co., Ltd

XR

ZheZheJiang ngrui gear transmission Co., Ltd

ZZ

Sinotruk Xihu (West Lake) Dis. gearbox Co., Ltd

HD

ZHangZhoug Xihu (West Lake) Dis.feng Gear Co., Ltd

HC

HangZhou Xihu (West Lake) Dis. gearbox Group Co., Ltd

QJ

Xihu (West Lake) Dis. Gear Transmission Co., Ltd

LG

Fudong CHINAMFG automobile bridge box Co., Ltd

ZM

ZHangZhoug Zhongma automobile transmission Co., Ltd

ZC

HangZhou Gear Co., Ltd

LQ

HangZhou Qingfu transmission Co., Ltd

CQ

ZheJiang Qingfu transmission Co., Ltd

SR

Shengrui transmission Co., Ltd

JF

Jiefu Transmission Technology Co., Ltd

   

 

Certifications

Packaging & Shipping

 

FAQ

1.Are you trading company or manufacturer ?

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What’s the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts?

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale?

We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need.

7.What’s the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment?
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you.

9.How can you ensure the quality of the products?

Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.

There are 5 commonly used wrecker tow truck , usually depending on the type or size of the recovery wrecker :
First type : Boom towing truck

– use adjustable arms and winches to retract vehicles from ditches, embankments, or any vehicle that cannot arrive safely. Some booms are fixed, some heavy rotating racks, hydraulic telescopic tubes, others. In the past boom, trucks used the “hook chain” system, the chain around the frame or axle, and then hoisted by the winch. A heavy rubber pad is attached to the truck and truck so that it can be towed CHINAMFG other bridges.” Slings and belts are an evolution, replacing parts of chains with rubber belts. slings did not use too much today because they could shave bumper cars. But they are sometimes used in wrecker accidents carrier or have 1 or 2 front wheels or rear wheels missing or pickups and other vehicles have steel bumpers. Equipped with all wheel drive, the truck is towed away, unable to use the machine string, because it can make the car power transmission system problems.

Second type :Wheel lift wrecker towing truck

(also called “glasses”) – from the chain hook technique to generate a large metal frame, can be installed in the front or rear under the cradle, rendering vehicles by pneumatic or hydraulic hoist can drag the ground clear front or rear. The device usually picks up the wheel of the vehicle (i.e., front wheel, if it is front wheel drive, rear wheel, if it is rear wheel drive), and contacts the tire. wheel lift wrecker tow truck are common in china; cradles are like glasses. Medium and heavy-duty trucks use variations, “underlift” or “chassis lift”, in which the elevator shaft or frame is not the wheel. A forklift truck can be used as an adapter or a lift chassis.

Third type :Integration towing truck (also known as “Self Loader wrecker equipment“, “Snatcher towing vehicle“, “quick choice tow truck” or “roll back wrecker“) – the arm and wheel lift together. Used of light trucks to recover or stop vehicles. Most of the truck’s cab equipment is controlled so that the pickup truck does not leave the truck to connect the vehicle. heavy trucks are also manufactured using integrated lifts.

Forth type –Flat plates wrecker truck (also known as “rolling back tow truck” or “sliding tow truck“) – the entire back of the truck is fitted with a bed that can be hydraulically tilted down to the ground, allowing the vehicle to be placed under its own power or pulled up by the winch. [9] because they carry, rather than traction vehicles, it can be completely fixed; in the United States, they carry serious damage to car accidents.

Fifth type —Lifting platform wrecker truck the derricks lift the vehicle vertically and use the wheel lift to load it on the bed. In Europe, this car can eliminate the parallel parking of vehicles.

 

Application: Motor, Machinery, Agricultural Machinery, Car, Hydraulic Gear Pump Crane ( Oil Pump, Fuel Pump
Function: Distribution Power
Pto: Sdq24/69 Sdq24/71, Sdq24/70, Sdq24/69-1
Gearbox 1: 17kt6K-00030, 17g0a7-15(Jiangshan), 17jk35-00030
Transmission 2: 646b, Mly6s51b-20b-00, Wly6ts55b-63-32, Wly6s51b-2
Transmission 1: 17g1a7-15, 17jk07-00030-E, 17FT67-00030, 17D100-00
Samples:
US$ 580/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agricultural gearbox

Case Studies: Successful Implementations of Agricultural Gearboxes

Several case studies highlight the successful integration of agricultural gearboxes in farming machinery:

  1. Case Study 1: Tractor Versatility

    A farm in the Midwest implemented tractors equipped with adjustable gearboxes. The gearboxes allowed the tractors to seamlessly switch between plowing, planting, and harvesting tasks. The ability to customize speed and torque ratios improved efficiency and reduced the need for multiple machines.

  2. Case Study 2: Orchard Management

    An orchard in California utilized specialized gearboxes in its mechanized harvesters. These gearboxes facilitated controlled movement and precise positioning of the harvesters among trees. The adaptability of the gearboxes enabled the harvesters to navigate the orchard’s uneven terrain while minimizing damage to trees and fruit.

  3. Case Study 3: Precision Planting

    A farm in Europe integrated precision planting machinery with gearboxes that offered adjustable gear ratios. This allowed for precise control over seed placement and depth. The gearboxes played a vital role in achieving uniform crop emergence and optimizing seed-to-soil contact.

  4. Case Study 4: Multi-Tasking Implements

    A farming cooperative in Australia utilized multi-tasking implements equipped with versatile gearboxes. These implements could seamlessly switch between tasks such as plowing, harrowing, and fertilizing. The gearboxes’ ability to manage torque and speed ratios ensured optimal performance across various tasks.

  5. Case Study 5: Soil Conservation

    A farm in Africa adopted gearboxes in its soil conservation practices. By attaching specialized implements with adjustable gearboxes to their tractors, the farm effectively controlled soil erosion and improved water infiltration rates. The gearboxes allowed for precise adjustments based on soil type and slope.

These case studies illustrate the impactful role of agricultural gearboxes in enhancing efficiency, versatility, and productivity across a spectrum of farming applications.

agricultural gearbox

Enhancing Efficiency and Productivity in Farming Operations with Agricultural Gearboxes

Agricultural gearboxes play a pivotal role in enhancing efficiency and productivity across various farming operations. Here’s how agricultural gearboxes contribute to improving farming practices:

  • Power Transmission: Agricultural gearboxes efficiently transmit power from the tractor’s engine to various implements, enabling them to perform tasks like plowing, planting, and harvesting with optimal power and torque.
  • Variable Speed Control: Gearboxes allow farmers to adjust the speed of attached implements, adapting to different soil types, crop conditions, and tasks. This flexibility ensures precision and optimal performance.
  • Task Specialization: With the use of different attachments and implements, one tractor equipped with a gearbox can perform a variety of tasks, reducing the need for multiple specialized machines.
  • Optimized Torque: Agricultural gearboxes provide the necessary torque to overcome resistance from tough soils, vegetation, and other challenging conditions, ensuring consistent and efficient operations.
  • Improved Crop Management: Gearboxes enable precise control over seeding depth, planting spacing, and fertilization, contributing to better crop management and higher yields.
  • Reduced Operator Fatigue: Efficient power transmission and controlled operations reduce the physical strain on operators, enabling them to work longer hours without excessive fatigue.
  • Conservation of Resources: By allowing accurate distribution of seeds, fertilizers, and other inputs, gearboxes help conserve resources and minimize waste.
  • Enhanced Harvesting: Gearboxes facilitate smooth operation of harvesting equipment, such as combines and forage harvesters, resulting in efficient gathering of crops without damage.
  • Time and Labor Savings: Agricultural gearboxes speed up tasks like plowing, tilling, and planting, enabling farmers to cover larger areas in less time, which is particularly crucial during planting and harvesting seasons.
  • Reliability and Durability: Well-designed gearboxes are built to withstand the rigors of farming environments, reducing downtime due to maintenance or equipment failure.

Incorporating agricultural gearboxes into farming equipment significantly contributes to streamlining operations, reducing manual effort, and optimizing the use of resources. As a result, farmers can achieve higher levels of efficiency, productivity, and overall farm profitability.

agricultural gearbox

Role of Agricultural Gearboxes in Agricultural Machinery

An agricultural gearbox is a specialized type of gearbox used in various agricultural machinery and equipment. It plays a crucial role in the proper functioning of agricultural equipment by transmitting power and torque from the engine to the different components that perform specific tasks in the field.

Agricultural gearboxes are designed to withstand the demanding conditions of agricultural operations, including exposure to dust, dirt, moisture, and heavy loads. They are commonly used in a wide range of agricultural machinery, including tractors, combines, tillers, sprayers, and more.

The primary functions of agricultural gearboxes include:

  • Power Transmission: Agricultural gearboxes transmit power from the engine to various components, such as wheels, blades, and belts, enabling them to perform their respective tasks.
  • Speed Control: Gearboxes allow operators to control the speed and output torque of agricultural machinery. Different tasks require different speeds and levels of torque, and gearboxes provide the necessary adjustments.
  • Direction Change: Many agricultural operations require changing the direction of rotational motion. Gearboxes enable smooth and efficient direction changes without the need for complex mechanical arrangements.
  • Adaptation to Tasks: Agricultural gearboxes are equipped with various gears and shafts that can be configured to match the requirements of specific tasks, such as plowing, planting, harvesting, and more.

These gearboxes come in different configurations, such as straight-cut gears, helical gears, and planetary gears, depending on the specific application and requirements. The choice of gearbox type, gear ratio, and design factors contribute to the overall performance, efficiency, and durability of agricultural machinery.

Regular maintenance and lubrication are essential to ensure the longevity and reliable operation of agricultural gearboxes. Proper care and upkeep help prevent premature wear and damage, ensuring that the machinery performs optimally throughout the farming seasons.

China Professional Pto (Power Take Off) for DFAC (Dongfeng Truck) Duolika Sdq25-67lgq1 Transmission Gearbox 1700010-C22112 Teeth 25   automatic gearbox	China Professional Pto (Power Take Off) for DFAC (Dongfeng Truck) Duolika Sdq25-67lgq1 Transmission Gearbox 1700010-C22112 Teeth 25   automatic gearbox
editor by CX 2023-09-04

China OEM Agricultural Machinery Hydraulic Pto Power Splitter Gearbox for Connecting Multiple Hydraulic Pumps synchromesh gearbox

Product Description

The Pump Drives (Hydraulic pump Drives) is a gearbox allowing the connection between a prime mover (internal combustion engine or electric motor for example) and 1 or more hydraulic pumps. Usually it is used on both stationary and mobile application where mechanical power must be converted into hydraulic power for the purpose of operating travel functions and services.

The hydraulic pumps drives gearboxes consist of a gear drive inside a CHINAMFG housing that connects to a gasoline or diesel engine. The opposite side contains 1 or more standard 2- or 4-bolt flanges for mounting hydraulic pumps. This configuration provides several benefits. For one, 2 or more identical pumps can be connected to provide nearly identical hydraulic output flow from each. Or different sized pumps can be used provide output flow proportional to the displacement of each pump.These gearboxes not only saves space and weight but also eliminates the number of components and reduces assembly time for the whole machinery. Our modular pump drives could allow driving 2 to 4 pumps simultaneously. This not only offers design flexibility, but can boost system efficiency as well.

Model 2 pumps drive 3 pumps drive 4 pumps drive
Parameter KK190-2N KK400-2N KK530-2N KK700-2N KK280-3N KK400-3N KK530-3N KK700-3N KK530-4N KK700-4N
Max. Input power (KW) 190 400 530 700 280 400 530 700 530 700
Max. Output power per pump pad (KW) 110 210 270 360 150 210 270 360 270 330
Max. Output torque per pump pad (Nm) 400 900 1500 1900 800 900 1500 1900 1500 1800
Max. Input speed (RPM) 2800 2600 2600 2400 2800 2600 2600 2400 2600 2400
Max. Output speed (RPM) 3200 2800 2800 2700 3200 2800 2800 2700 2800 2700
Transmission ratio 0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98··· 0.67/0.74/0.81/0.89/0.98···
Mount size of Prime mover SAE #3 #4 etc. SAE #2 #3 etc. SAE #1 #2 #3 etc. SAE #0 #1 #2  etc. SAE #3 #4 etc. SAE #2 #3 etc. SAE #1 #2 #3 etc. SAE #0 #1 #2  etc. SAE #1 #2 #3 etc. SAE #1 #2  etc.
Port size of Single pump SAE A,B,C flange etc. SAE A,B,C,D flange etc. SAE B,C,D,E flange etc. SAE C,D,E flange etc. SAE A,B,C flange etc. SAE A,B,C,D flange etc. SAE B,C,D,E flange etc. SAE C,D,E flange etc. SAE B,C,D,E flange etc. SAE B C,D flange etc.
Housing material Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron

agricultural gearbox

Lubrication Practices for Extending the Lifespan of Agricultural Gearboxes

Proper lubrication is essential for ensuring the longevity and optimal performance of agricultural gearboxes. Here are some essential lubrication practices that can help extend the lifespan of these gearboxes:

  • Choose the Right Lubricant: Select a high-quality lubricant specifically designed for gearboxes and agricultural machinery. Consider factors such as viscosity, temperature range, and load-bearing capacity to ensure compatibility with the gearbox’s operating conditions.
  • Regular Inspection: Perform regular visual inspections of the gearbox and lubricant to check for signs of contamination, wear, or inadequate lubrication. Address any issues promptly to prevent further damage.
  • Cleanliness: Maintain a clean environment around the gearbox to minimize the risk of dirt, debris, and moisture entering the gearbox housing. Contaminants can compromise the lubricant’s effectiveness and accelerate wear.
  • Lubricant Level: Monitor and maintain the proper lubricant level in the gearbox. Insufficient lubrication can lead to increased friction and heat, causing premature wear and potential damage to gears and bearings.
  • Replace Lubricant: Follow the manufacturer’s recommendations for lubricant change intervals. Over time, lubricants can degrade, lose their properties, and become contaminated. Regularly replacing the lubricant helps ensure optimal performance.
  • Use Lubrication Schedule: Create a lubrication schedule based on the gearbox’s usage and operating conditions. Stick to the recommended intervals for applying or changing lubricant to prevent under-lubrication or over-lubrication.
  • Appropriate Lubrication Method: Follow the manufacturer’s guidelines for the correct lubrication method, whether it’s through oil bath, grease, or automatic lubrication systems. Proper application ensures even distribution of lubricant across gear surfaces.
  • Temperature Considerations: Be aware of temperature variations in your operating environment. Extreme temperatures can affect lubricant viscosity and performance. Choose a lubricant that can handle the temperature range of your equipment.
  • Expert Advice: Consult the gearbox manufacturer or a lubrication specialist to determine the best lubrication practices for your specific agricultural gearbox model and application.

By adhering to these lubrication practices, farmers can maximize the lifespan of their agricultural gearboxes, minimize downtime, and ensure efficient and reliable operation of their equipment.

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Speed Changing, Speed Reduction, Speed Increase
Installation: Horizontal Type
Type: Cylindrical Gear Box
Output Power Kw: 110-330
Housing Material: Cast Iron
Samples:
US$ 27990/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agricultural gearbox

Maintenance Requirements for Agricultural Gearboxes

Maintaining agricultural gearboxes is crucial to ensure the smooth and efficient operation of farming equipment. Proper maintenance helps extend the lifespan of gearboxes and prevents costly breakdowns. Here are the key maintenance requirements:

  • Regular Inspections: Conduct routine visual inspections to check for signs of wear, damage, leaks, or misalignment. Regularly inspect gear teeth, seals, and bearings for any issues.
  • Lubrication: Proper lubrication is essential to minimize friction and wear in gearboxes. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for lubrication.
  • Lubricant Checks: Monitor the gearbox’s lubricant levels and quality regularly. Replace or replenish lubricants as needed, and ensure that contaminants are kept out of the lubrication system.
  • Tightening Bolts and Fasteners: Check and tighten bolts, nuts, and fasteners to prevent loosening due to vibrations during operation. Loose components can lead to misalignment and premature wear.
  • Seal Inspection: Examine seals for leaks and proper sealing. Damaged or worn seals should be replaced promptly to prevent lubricant leakage and the ingress of contaminants.
  • Cleaning: Keep gearboxes clean by removing dirt, debris, and residue. Regular cleaning prevents abrasive particles from entering the gearbox and causing damage.
  • Alignment: Ensure that gearboxes are properly aligned with connected components, such as shafts and couplings. Misalignment can lead to increased wear and reduced efficiency.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox. Abnormal temperature increases may indicate issues like overloading or insufficient lubrication.
  • Filter Replacement: If the gearbox has a filtration system, regularly replace or clean the filters to prevent contaminants from entering the gearbox.
  • Expert Inspection: Periodically have gearboxes agricultural gearbox

    Factors to Consider When Selecting the Right Gearbox for Farm Machinery

    Choosing the appropriate gearbox for farm machinery is crucial to ensure optimal performance and efficiency. Here are the key factors to consider when selecting the right gearbox:

    • Power and Torque Requirements: Assess the power and torque needed for the specific task the machinery will perform. Select a gearbox that can handle the required load without straining the components.
    • Speed Variation: Determine if the machinery requires variable speed control for different tasks. Some gearboxes offer adjustable speed options to match varying conditions and applications.
    • Task Compatibility: Ensure that the chosen gearbox is compatible with the implements and attachments the machinery will use. Different tasks may require different gear ratios and torque capabilities.
    • Efficiency: Opt for gearboxes known for their efficiency in power transmission. Efficient gearboxes minimize energy losses and maximize the output of the machinery.
    • Durability: Farming environments can be demanding, so select a gearbox that is built to withstand the conditions, such as exposure to dirt, moisture, and impacts.
    • Size and Weight: Consider the available space and weight limits on the machinery. Choose a gearbox that fits within these constraints without compromising performance.
    • Maintenance: Evaluate the maintenance requirements of the gearbox. Gearboxes that are easy to maintain and service can minimize downtime and keep the machinery running smoothly.
    • Cost: Balance the initial cost of the gearbox with its long-term benefits and performance. Investing in a quality gearbox can lead to better overall cost-effectiveness over time.
    • Compatibility: Ensure that the gearbox is compatible with the power source (such as the tractor’s power take-off) and other components of the machinery.
    • Manufacturer Reputation: Choose gearboxes from reputable manufacturers with a history of producing reliable and high-quality agricultural machinery components.

    By carefully considering these factors, farmers can select the right gearbox that meets the specific needs of their farm machinery, leading to enhanced efficiency, productivity, and longevity of equipment.

    inspected by qualified technicians. They can identify potential problems that may not be visible during routine inspections.

Adhering to these maintenance requirements ensures that agricultural gearboxes remain in optimal condition and contribute to the reliability and efficiency of farming equipment. Regular maintenance not only prevents unexpected downtime but also prolongs the service life of the gearboxes, ultimately benefiting the productivity of agricultural operations.

China OEM Agricultural Machinery Hydraulic Pto Power Splitter Gearbox for Connecting Multiple Hydraulic Pumps   synchromesh gearbox	China OEM Agricultural Machinery Hydraulic Pto Power Splitter Gearbox for Connecting Multiple Hydraulic Pumps   synchromesh gearbox
editor by CX 2023-08-14

China wholesaler Basic Customization Hot Sale Agricultural 90 Degree Farm Pto Right Angle Gearbox for Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger wholesaler

Product Description

Basic customization Hot Sale Agricultural 90 Degree Farm Pto Right Angle Gearbox for Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger

This series gear box is mainly used on mower (grass cutter). It has the characteristics of high univerality, simple structure and good performance.

Details:
– ISO9001 Quality System examined & verified by Third Party of CQC and passed second-degree safety quality standardization for machinery manufacturing enterprise.
– Precision forging, cutting by CNC machine, heat treatment by German IPSON & laser techniques .
– Strictly quality control by German CMM.
– Various of gearboxes used in agricultural machines and industrial machines.
– Advanced technics, strong self-development power, able to produce new type gearbox according to customer’s design drwings.

Code Input Power
(HP)
Gear Ratio
(i)
Input Speed
(r.p.m.)
Weight
(kg)
XH30.147Z.03L 30HP 1:1.47 540 16.85
XH30.192Z.03L 30HP 1:1.92 540 16.85

HangZhou CHINAMFG Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our CHINAMFG in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

Our other hot sale products. 


 

Application: Reducer
Function: Speed Reduction
Layout: Cycloidal
Hardness: Hardened
Installation: Torque Arm Type
Step: Stepless
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

agriculturalparts

The Importance of an Agricultural Gearbox

The role of an agricultural gearbox is crucial to the production of food. They play a crucial role in agricultural equipment, and are needed at every stage of the food chain. As the population increases and the need for food rises, gearboxes are increasingly becoming a critical component of heavy-duty equipment. To maintain a high quality, agricultural gearbox, replacements must be available at a reasonable cost. In addition, they need to be easily accessible.

Bevel gearboxes

A durable bevel gearbox is a critical component of any agricultural gearbox. The mechanisms and materials used to make the device will determine its durability. Investing in a long-lasting gearbox will save you the trouble of replacing it later. Bevel gearing is one of the most common types of mechanical gearing, and its advantages are many. A durable gearbox is reliable, easy to use, and cost-effective, ensuring that you will never have to replace it.
Bevel gearboxes are available in different tooth shapes and sizes, and are typically realized with straight or helical teeth. Bevel gearboxes can be either parallel or oblique in direction, and their axes can intersect at 90 degrees. Bevel gearboxes can have opposite or parallel output shafts, and the direction of the drive and output shaft can be the same or opposite, depending on the installation.
A tractor PTO can be a powerful source of torque, but it can only transmit the same amount of torque at slower speeds. Agricultural implements, on the other hand, use chains and pulleys to transmit their torque. This type of heavy-duty gearing is essential for the heavy-duty demands that agricultural implements place on them. Although geared agricultural applications are the most common, they are not limited to agriculture. Most agricultural gearboxes are used in wheel drives and massive torque low-speed applications.
Bevel gearboxes for agricultural machinery applications have several characteristics that make them useful. A right angle gearbox, for example, is well suited for use with offset rotary fillers and hollow output shafts. It offers a reduction ratio of up to 2.44:1, has a cast-iron case, and delivers power up to 49kW. It is designed for small agricultural work, such as crop treatment, soil preparation, and cement mixers.

CHINAMFG gearboxes

There are countless reasons why CHINAMFG agricultural gearboxes are so important. Global population is increasing by 80 million people per year, and that demand is only expected to continue rising. In addition to a constantly growing population, cropping cycles are getting shorter, putting even more strain on farm machinery, including gearboxes. Fortunately, CHINAMFG offers a variety of solutions to maintain and repair your equipment, from on-site repairs to storage options.
Agricultural gearboxes are essential to the cropping process, and CHINAMFG reducers perform a variety of critical tasks. The reversing gear, for instance, helps reduce friction and increase efficiency. The reversing gear is usually made of ball bearings, and is available in various versions and power capacities. Agricultural gearboxes are essential for a number of tasks, including a tractor’s ability to pull a tiller.
In the agricultural industry, a CHINAMFG ag-class reducer powers a beet truck’s conveyor. Its durable helical gearing and grease-purged Viton seals keep it working properly for years. CHINAMFG Ultramite gearmotors can be used to power pilers, stackers, and hoists. They generate low speed directly and can also support high-speed pinions.
CHINAMFG Gearbox Company is one of the world’s premier manufacturers of high-performance gearboxes. Its highly experienced engineers can reverse engineer existing designs and help you design custom gearboxes for agricultural applications. Whether your gearbox needs to be used for a tractor, a hay baler, or a grain cart, CHINAMFG Gearbox Company can provide a solution. A CHINAMFG agricultural gearbox will help you make the most of your farm machinery by reducing your environmental footprint.
agriculturalparts

Closed-loop seals

A closed-loop seal is an excellent alternative to desiccant breathers, which can lead to contamination. A closed-loop seal can isolate a gearbox from the atmosphere, ensuring that no moisture or contamination can enter. This is essential for the safety of the equipment. A closed-loop elastomeric seal prevents water from entering the gearbox, preventing contamination and lubrication from escaping.
These high-tech seals combine service life and reliability, enabling new breakthroughs in agriculture, infrastructure and transportation. Moreover, these high-performance mechanical drive components are an essential part of breakthroughs in industries like energy, agriculture and transportation, as well as global megatrends like digitalization. As a result, they extend the life of agricultural gearboxes. But how do these high-tech seals perform?
A closed-loop seal is critical for agricultural gearboxes, as they keep the lubricants and gases in the gearbox. They are essential for the entire food chain, as even a little bit of downtime can cut production costs. This is why a high-quality agricultural gearbox is essential for safety and easy maintenance. To ensure a high-quality, long-lasting performance, closed-loop seals should be a standard feature.
Another improvement over single-lip designs is the inclusion of a dust-lip. The outer lip of the closed-loop seal can be damaged by temperature and contaminants. Once the outer lip fails, debris will accumulate against it and under it, causing a leak and seal failure. When this happens, it’s too late to repair the seal. You’ll need to invest in a new agricultural gearbox, and you don’t want to waste money on an expensive failure.

Surface finish

An agricultural gearbox should be free of mechanical damage and casting defects. Surface finish should be as close as possible to 76. The distance between shafts and bearing housing must be within six millimeters and the surface finish should be smooth. In addition, the shaft surface finish should not exhibit any ellipticity or directional pattern. A smooth surface is comfortable to operate. In this way, it improves the quality of comfort while driving.
There are various types of gears and their surface finishes. For example, bevel gears, sun gear drive, and planetary gearbox are common in agricultural applications. The surface finish of agricultural gears varies depending on the type of material used. In certain industries, gears can be subjected to low torques and strong forces. However, in agriculture, gears are subjected to specific conditions such as dustiness and contaminated water.
Various studies have been conducted to study the effectiveness of various surface finishes. Some of these studies have focused on the quality class of honed wrought steel gears. However, results were inconsistent. It was determined that the difference in the quality class of honed wrought steel gears was less than 3%, which was within the acceptable range of errors in the assembly process. However, it remains important to note that a high quality surface finish is crucial for a high gearbox’s performance.
Stream finishing has proven to be more effective in enhancing surface finish. Compared to honing and grinding, Stream finishing produces a smooth surface that is two to four times better than conventional finishes. The benefits of this method include high-quality metal and reduced waste. The process of isotropic superfinishing makes a gearbox more efficient than other manufacturing processes. In addition, it improves the lifespan and durability of its components.
agriculturalparts

Cost

Agricultural gearboxes are critical for the production of the food we eat. With heightened food demand, a worn out gear will lead to increased equipment wear and downtime, resulting in significant losses for farmers. Agricultural gearboxes should be of high quality, as they are critical for the whole food chain. These gears can be costly to replace and can cause significant downtime, resulting in a failure to meet the demand.
To determine the cost of an agricultural gearbox, you need to compare the prices offered by different manufacturers. If you’re planning to purchase a new agricultural gearbox, look for one that’s manufactured by an authentic equipment manufacturer such as CHINAMFG. Don’t settle for a gearbox that’s not manufactured by an OEM, as it won’t last long. Also, check the safety section of the manufacturer’s website for advice on selecting a gearbox for your needs.
China wholesaler Basic Customization Hot Sale Agricultural 90 Degree Farm Pto Right Angle Gearbox for Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger   wholesaler China wholesaler Basic Customization Hot Sale Agricultural 90 Degree Farm Pto Right Angle Gearbox for Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger   wholesaler
editor by CX 2023-07-11

China 1000 to 540 Tractor Toyota PTO Right Angle Bevel Cutter Agricultural Rotovator Power Rotary Tiller Gearbox for Flail Mower agricultural right angle gearbox

Warranty: 3 several years
Relevant Industries: Production Plant, Equipment Restore Shops, Meals & Beverage Manufacturing facility, Farms, Residence Use, Retail, Food Store, Development works , Power & Mining, Foodstuff & Beverage Stores, Advertising and marketing Organization, gearbox for agricultural equipment gear box for ag
Weight (KG): twenty five
Custom-made assist: OEM, ODM, OBM
Gearing Arrangement: Bevel / Miter, Bevel / Miter
Output Torque: -1 25819-27040 14956-AD20A for CHINAMFG RAV4 2001-2005 and cylindrical gearbox. It also includes a range of substantial-stress solid valve physique and shell goods. Its goods are employed in a variety of purposes, this kind of as agricultural mowers, snow sweepers, fertilizer applicators, grain conveyors, industrial gear, oil mining equipment, marine industrial tools, and engineering hydraulic components. Far more than ninety five% of its items are exported to Europe, the United States, and Australia. Asia and Canada. The organization has sturdy engineering and R & D abilities, produces reputable and substantial-top quality goods, pursues a distinctive company philosophy and enjoys a high track record in the manufacturing sector. Welcome to contact us by cellphone or email. Certifications FAQ Q: Are you buying and selling firm or maker ?A: Our group consists in 3 factories and 2 overseas sales companies.
Q: Do you provide samples ? is it free of charge or extra ?A: Yes, we could offer the sample for free charge but do not pay out the value of freight.
Q: How long is your supply time ? What is your conditions of payment ?A: Normally it is forty-45 days. The time may range dependent on the product and the level of customization. For standard merchandise, the payment is: thirty% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your merchandise ?A: As an OEM firm, we can offer and adapt our goods to a broad assortment of requirements.Therefore, MOQ and value might tremendously vary with measurement, material and further specs For occasion, Agriculture Equipment Second Hand Entire world 102 one hundred and five horsepower Employed Combine Harvester high priced goods or standard merchandise will typically have a decrease MOQ. Make sure you contact us with all related specifics to get the most precise quotation.
If you have an additional concern, please really feel totally free to get in touch with us

gearbox

Types of Gearboxes Used in Wind Turbines

Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.

Coaxial helical gearbox

The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CHINAMFG can help you find it.
gearbox

Worm reduction gearbox

As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.

Stainless steel gearbox

Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CHINAMFG Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CHINAMFG Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CHINAMFG Gear sales representative to find the perfect solution for your business.
gearbox

1 speed gearbox

Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.

China 1000 to 540 Tractor Toyota PTO Right Angle Bevel Cutter Agricultural Rotovator Power Rotary Tiller Gearbox for Flail Mower     agricultural right angle gearboxChina 1000 to 540 Tractor Toyota PTO Right Angle Bevel Cutter Agricultural Rotovator Power Rotary Tiller Gearbox for Flail Mower     agricultural right angle gearbox
editor by Cx 2023-06-30